Power Source; Installation Method - Panasonic VL-WD812EX Information De Produit

IP rating
Adjustable mounting angles
Heat sensor adjustable angles
Power supply unit (VL-PS240) (indoor use only)

Power source

Dimensions (mm) (height ´
width ´ depth)
Mass (weight)
Operating environment

Installation method

*1 The minimum illuminance required when the camera's [Brightness] setting is set to [+3].
*2 Approx. 8.5 lx when 3 m in front of the camera, and approx. 4 lx when 3 m away and 20° to the left or right of the
camera.
*3 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation
Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed
to water or rain.
Note:
R Design and specifications are subject to change without notice.
R Names, company names, product names, software names, and logos mentioned in this manual are trademarks
or registered trademarks of the companies concerned.
*3
IP54
Horizontal: ±90°, vertical: facing forward - facing down approx. 60°
(adjustable when mounting)
Manually adjustable to 2 angles
Input: 220-240 V AC, 0.2 A, 50/60 Hz
Output: 24 V DC, 0.6 A
Approx. 116´100´54 (excluding protruding sections)
Approx. 230 g
Ambient temperature: approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Attach to DIN rail
9