Abicor Binzel ABIMIG 240 D WT Mode D'emploi page 21

®
ABIMIG WT
7.3 Cleaning the torch neck
NOTE
• Clean the gas nozzle interior regularly to remove weld spatter and spray
it with original ABICOR BINZEL anti-spatter agent.
• Check the wear parts for visible damage and replace defective parts.
• Make sure that the cutting point is clean, in order to increase the life of O-
rings and ensure effective power transmission.
• Replace worn-out or damaged O-rings.
• Use the delivered insulating hose for depositing the torch neck and
protecting the torch neck interface.
7 Maintenance and cleaning
EN - 11