Troubleshooting - Vacmaster VJE1650SW Mode D'emploi

GB
WARNING:

TROUBLESHOOTING.

Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge filters as necessary. Replace full dust bags to prevent performance drops. A performance
drop with clean filters can only be caused by a blockage in the tools or the hose.
PROBLEM
The appliance does not work.
Dust is escaping from the
motor cover.
Low suction power and high
operating noise / vibrations.
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
POSSIBLE CAUSE
No power.
Functional fault in the power
cord, switch, or motor.
The cartridge filter is missing
or damaged.
Misuse the cartridge filter
when wet vacuuming,
causing the damage of
cartridge filter.
Misuse the foam filter when
dry vacuuming.
Dust bag is full.
Suction nozzle, hose, or tank
inlet is blocked.
Cartridge filter is blocked.
Float valve has closed.
Check the power supply and
fuse.
Have the damaged part
checked by qualified
personnel or contact the after
sales helpline.
Put in a cartridge filter or
replace it.
Replace the damaged
cartridge filter with a new one
when dry vacuuming.
Replace the foam filter with
the cartridge filter.
Replace the dust bag.
Check the suction nozzle,
hose, and tank inlet for
obstructions.
Remove the cartridge filter and
clean.
Empty the container of any
liquid waste and ensure the
float value located underneath
the filter is able to move freely.
14
SOLUTION