that the interference is originated by this instrument, take one of the following measures:
• Change the instrument's position with respect to the receiver.
• Increase the distance between the instrument and the receiver.
• Connect the instrument's plug to a different outlet to make sure that the instrument and
the receiver are connected to two different circuits.
• If necessary, contact a specialised technician.
power supply
• Before connecting this instrument to any other equipment (amplifier, mixer, other MIDI
instruments, etc.) make sure that all units are switched off.
• Read the instructions about Radio and TV interference.
how to Clean thIs Instrument
• Use only a soft and dry cloth to clean the external surface of your instrument. Never use
petrol, thinners or solvents as a rule of thumb.
other preCautIons
If you wish to use your instrument abroad and if you have any doubts about the power supply,
contact a qualified engineer previously.
The instrument should never be subject to strong vibrations.
external power supplIes
To connect this instrument to the wall socket you will need the supplied KETRON power
supply.
Use of other power supplies could result in damage to the instrument's power circuit. So be
sure to ask for the right kind.
InFormatIon For users
Subject to article 13 of Legislative Decree no. 151 dated 25th July 2005: "Implementation
of Directives 2002/95/CE, 2002/96/CE and 2003/108/CE related to the reduction
in use of hazardous compounds in electrical and electronic equipment and waste
disposal".
The symbol of the crossed-out rubbish bin applied on the equipment or its
packaging means that the product must be scrapped separately from other
waste at the end of its useful lifetime.
The user shall therefore hand the instrument over to differentiated
recycling tips that handle electrical and electronic equipment at the end
of its useful lifetime, or shall hand it over to the retailer when purchasing a new similar
instrument on a one-to-one basis.
The differentiated collection and subsequent forwarding of disused equipment for recycling,
processing and environment friendly disposal contributes in avoiding possible negative
effects on the environment and human health and favours the re-use and/or recycling of the
constructional materials of the instrument.
The owner of the instrument is liable to the administrative fines imposed by current law if he/
she should scrap the instrument in a non-conforming manner.
25