Always stop analysis before turning off the Analyzer.
This is a Class A product. In a domestic environment, this product may cause
electromagnetic interference in which case the user may be required to take
adequate measures to correct the interference.
If this instrument is used in a manner not specified by SUEZ, the protection
provided by the instrument may be impaired.
Consult the MSDS that accompanies each standards set and the reagents to
identify proper disposal techniques.
Keep foreign objects away from the Analyzer's fan to avoid introducing hazards
into the Analyzer. The cooling air inlet for the reactor is at the bottom of the
Analyzer; do not allow paper or other objects to block or enter that inlet.
If you experience an issue with the printed circuit assembly (PCA) that contains
a lithium battery, please contact SUEZ or your local service provider for return
instructions. Whenever changing the lithium battery, observe the correct
polarity. Dispose of used batteries according to the manufacturer's instructions
and local disposal requirements.
SUEZ © 2018
Warning
Warning
Warning
Warning
Warning
Warning
22 / 271
DLM 68100-12 FR Rev. C