Additional Information; Legal Notices - Dynex DX-WLOM2 Guide De L'utilisateur

Cleaning the mouse
Programming the mouse
To program the mouse:
1 Double-click the Mouse Setting icon
2 Click the Wheel or Button tab, then select a function or modify
the setting.
3 Click OK when finished.
Cleaning the mouse
Wipe the bottom of the mouse with a damp, lint-free cloth.

Additional information

• Do not change the frequency, features, and functions of the
wireless mouse from the original design.
• The optical technology can precisely detect the mouse motion on
most surfaces. Avoid using the optical mouse on any reflective,
transparent, metallic, or complex-pattern surface.
• The LED indicator or the scroll wheel on the mouse will light when
the mouse battery becomes weak. Recharge or change the
batteries immediately.
• Scroll the wheel to wake up the mouse while the mouse is in the
sleeping mode.
• Avoid using the mouse under the following conditions:
• In direct sunlight
• In an extremely hot, cold, dusty, or magnetic environment
• Near a fax machine, television, radio, mobile phone, or any
wireless device
• On a metal surface
• If the mouse malfunctions, change or recharge the batteries, or
move the receiver away from the computer and the monitor.

Legal notices

Federal Communications Commission
(FCC) requirements, Part 15
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes of modifications not expressly approved by the
grantee of this device could void the user's authority to operate the
equipment.
to program the mouse.
California Proposition 65 Warning
Copyright
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user' s authority to operate the
equipment.
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or reproductive harm.
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy
Enterprise Services, Inc. Other brands and product names are trademarks
or registered trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
3