Handpiece Cord Connection - NSK Varios 970 Mode D'emploi

CAUTION
Ensure the water from the dental unit runs clear before connecting to the scalar.
NOTICE
• Insert the Water Tube firmly into Control Unit.
• Pushing the White Ring, (the Quick Connector Release Ring) on
the Tap Water Connector, gently pull the tube to remove. (Fig. 7)
• When the water tube is not connected, mount the cover on the
Tap Water Connector.
(2) Foot Control Connection
Connect Foot Control Plug and the Control Unit with [
mark on the upper surface of the plug. (Fig.8)

(3) Handpiece Cord Connection

Insert Handpiece Cord Plug into Control Unit. [
is upper surface. Do not insert it up-side-down. (Fig.9)
CAUTION
Check that the Handpiece Cord Plug is clean & dry before connecting. (Fig.10)
]
Foot Control Plug
] Mark side
7
White Ring
Foot Control Connector
Handpiece Cord Connector
[ ]
Handpiece Cord Plug
Mark
Fig.7
[ ] Mark
Fig.8
Fig.9
Fig.10