Lincoln 85562 Manuel page 9

LINCOLN WAYSIDE LUBRICATOR
85562, 85563, 85564, 85565
5. Adjust the top face of the sensor to a height of 2.5" to 3.0"
below the top of the rail by sliding the sensor angle assem-
bly as required on the face of the base bracket. (See ¿ gure
16). Tighten the hook bolt nut, item #89 enough to hold the
sensor in position. Tighten the two 5/16-24 allen head cap
screws, item #84, on either side of the sensor angle ass'y.
to clamp the base bracket securely.
Figure 16B.
Figure 16. Adjust the sensor below the top of the railhead.
Figure 16C.
Figure 16A.
Figure 16D.
Page Number - 9
Form 403834
SHOP ONLINE at www.airlinehyd.com 800-999-7378