LINCOLN WAYSIDE LUBRICATOR
85562, 85563, 85564, 85565
Setting the System Controller
1. The unit will count to a preset number of axles that pass
the track sensor and then run the pump for a preset time.
Set the counter to 8 axle counts and the pump on time of
the controller to 4 seconds. (See Figures 20A & 20B) To
set the unit for a desired grease amount per wheel, see
table #1 (Page 3) for the proper settings.
Figure 20A. Adjust the pump time.
Figure 20B. Adjust Axle Count.
Page Number - 12
SHOP ONLINE at www.airlinehyd.com
Figure 20C. Power Switch.
Form 403834
800-999-7378