Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
ROOF PASS FIXING
•
Drill a hole using a hole saw. Diameter between 15 and 20mm
•
Clean the fixing zone with the provided degreaser (do not use alcohol/white spirit...).
•
Put the provided glue on the area indicated in white on the picture below, then put it over the
drilling hole.
•
Pass the cables as seen on the picture below. Keep a sufficient length for the connection. Tighten
the nuts of the cable gland to ensure waterproofness
6/10
www.uniteck.fr
Publicité
Table des Matières
