Machine Introduction - Clarke American Sanders 1600DC Manuel De L'utilisateur

OPERATOR SAFETY INSTRUCTIONS (cont.)
WARNING: Operating a machine without observing all labels and instructional information could result in injury
or damage. Read all machine labels before attempting to operate. Make sure all of the labels and
instructional information are attached or fastened to the machine. Get replacement labels and
decals from your authorized distributor.
WARNING: Use of this machine as a step or furniture could result in injury or damage. Do not use this
machine as a step or furniture. Do not ride on this machine.
WARNING: To avoid injury keep hands, feet and loose clothing away from all moving parts of this
machine.
WARNING: Injury can occur if protective clothing or equipment is not used while sanding. Always wear safety
goggles, protective clothing, and dust mask while sanding.
WARNING: Injury to operator or bystanders could occur if an abrupt change in fl oor surface texture is
encountered when using this machine. Abrupt change in fl oor surface texture can cause a
sudden pulling motion by this machine. This sudden pulling motion can result in loss of
control of the machine which could injure the operator or bystanders. Avoid motions that
could cause machine to cross from a smooth fl oor surface to a carpeted or rough texture
fl oor surface Avoid motions that could allow the machine to come in contact with low
obstacles, such as fl oor electrical outlets, door stops or entry molding, etc.
WARNING: Water solutions or cleaning materials used with this type of machine can leave wet areas
on the fl oor surface. These areas can cause a dangerous condition for the operator or
other persons. Always put CAUTION signs near the area being cleaned.
WARNING: Any alterations or modifi cations of this machine could result in damage to the machine or
injury to the operator or other bystanders. Alterations or modifi cations not authorized by
the manufacturer voids any and all warranties and liabilities.
CAUTION: The machine is heavy. Get assistance before attempting to transport or move it.
CAUTION: Use of this machine to clean carpet could cause damage to carpet and injury to operator or by-
standers. Do not use this machine to clean carpet.

MACHINE INTRODUCTION

The Sander 1600DC is a fl oor sanding machine. It can also be used for polishing, spraying, buffi ng and stripping. The
machine can be used on wood, vinyl, terrazzo or cement fl oors.
-4 - FORM NO. 70408B
The Sander 1600DC
American Sanders Operator's Manual - Sander 1600DC
®
Clarke
revised 9/13