Table des Matières
Publicité
Fine
Coarse
Type of food
shredder
shredder
Carrot
+
Cheese
+
Onion
+
Cabbage
+
Cucumber
+
Pod pepper
+
Beet
+
Apple
+
Chocolate
+
Raw potatoes
+
III. CLEANING AND MAINTENANCE
Clean all nozzles and appliance parts immediately after use.
CAUTION! Switch off the appliance and unplug it before disassembling and cleaning.
Disassembly
1. Remove the pusher from the feed hole.
2. Rotate the vegetable cutter unit 45° clockwise and disconnect it from the motor
unit.
3. Remove the lock ring from the vegetable cutter unit, rotating it clockwise.
4. Take out the removable nozzle.
Cleaning (scheme
A2
, p. 4)
• Wipe the motor unit with a damp cloth.
• Clean the nozzles and other details of the appliance with soft non-abrasive
cleansers.
• Do not clean the metal parts of the appliance in a dish washing machine, as
cleansing agents may blacken the surface.
8
Fine
Coarse
Product
Processing
grater
grater
weight, g
time
+
+
+
500
1 min
+
+
+
300
30 sec
+
+
500
40 sec
+
800
40 sec
+
+
+
800
40 sec
+
+
500
40 sec
+
500
1 min
+
500
20 sec
+
300
30 sec
+
+
500
1 min
• The maximum temperature when cleaning non-metal parts in a dish washer
should not exceed 60°C.
• The parts of the appliance should completely dry at room temperature and natu-
ral ventilation.
DO NOT immerse the motor drive unit, plug and power cord in water or keep in running
water.
DO NOT use sponges with hard or abrasive surface, abrasive scouring substances and
solvents (benzine, ethyl acetate and others).
Storage
Before repeated operation or storage completely dry all parts of the appliance. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
IV. BEFORE CONTACTING SERVICE CENTRE
Problem
Possible causes
Power cord is not connected to the
appliance and (or) to the outlet
The appliance
does
not
Faulty electrical outlet
switch on
Power supply failure
Motor unit
stopped dur-
Overload protection activated
ing operation
The appliance is overheated dur-
An off-odour
ing operation
appeared dur-
Some parts of the appliance have
ing operation
protective cover
Solution
Plug in the appliance
Plug in the appliance to the working
outlet
Check the voltage supply. In case of its
failure, contact an authorized organization
Press ON/OFF, unplug the appliance and
let it cool down for 30 minutes. Clean
the loading tray from remnants and plug
in the appliance
Reduce continuous operation time, in-
crease intervals between switching
The odour will disappear after few uses
Publicité
Table des Matières
