Villager V 722 Mode D'emploi page 56

Villager
5.2 SETTINGS
IMPORTANT: Turn off the PTO (drive shaft), turn off the engine, wait for all moving
parts to stop and remove the key before servicing, cleaning or performing
adjustments on the unit.
5.2.1 Adjusting the mowing height:
 Stop the engine, wait for all moving parts to stop, remove the key or remove
the cord from the spark plug.
 Turn the blades off.
NOTE: When changing the mowing height, always stop the machine completely
and turn the blades off.
 Insert the height adjustment pin into the opening corresponding to the desired
mowing height. See the label on the housing lifting plate. Move the lever out of
the transport position and down to the height adjustment pin - to mow at the
selected height. See Figure 8.
Housing
hook
Height adjusting
pin
Figure 7
Wheel mounting
part
Height adjusting handle
Figure
8
Height adjusting pin
25
V 722 (GB)