Diodetest - KPS PA70 Manuel D'instructions

3.2.11 Capacitance
Measuring range
9,999nF
99,99nF
999,9nF
9,9999μF
99,99μF
999,9μF
9,999mF
99,99mF
- Overload protection: 250V DC or AC (RMS)
3.2.1 Diode test
Measuring range
- Forward DC current is about 1mA
- Backward DC voltage is about 3.3V
- Overload protection: 250V DC or AC (RMS)
4. OPERATING GUIDANCE
4.1 Reading hold
• In the process of measurement, if reading hold is required, press "HOLD/
B.L" key, the value on the display will be locked. Press "HOLD/B.L" key
again to cancel reading hold state.
4.2 Manual Measuring Range
• RANGE key is automatic/manual measuring range key to trigger mode. The
preset one is automatic measuring range. Press to switch to manual mea-
suring range. In the manual measuring range mode, click once to change
KPS-PA70 • Digital clamp meter
Resolution
0,001nF
0,01nF
0,1nF
0,001μF
0,01μF
0,1μF
0,001mF
0,01mF
Resolution
Display approximate diode forward
0,001V
38
Accuracy
±(3.0% reading + 5 digits)
Accuracy
voltage value