KPS PA70 Manuel D'instructions page 28

can only be performed by technicians who fully understand the meter and
electrical shock hazard.
• Before opening the meter bottom case or battery cover, remove probe from
the circuit to be measured.
• To avoid wrong readings causing electric shock, when "
meter display, replace the battery immediately..
• Clean the meter with damp cloth and mild detergent. Do not use abrasives
or solvents.
• Power off the meter when the meter is not used.
• Switch the measuring range to OFF position.
• If the meter is not used for long time, remove the battery to prevent the meter
being damaged.
2. DESCRIPTION
• The meter is a portable, professional measuring instrument with LCD display
and back light for easy reading by users. Measuring range switch is oper-
ated by single hand for easy operation with overload protection and low bat-
tery indicator. It is an ideal multifunction meter for professionals, factories,
schools, fans and family use.
• The meter is used for AC current, DC current, voltage, DC voltage, frequen-
cy, duty ratio, resistance, capacitance measurement, circuit connection, di-
ode test and non-contact voltage detection.
• The meter has automatic measuring range and manual measuring range.
• The meter has reading hold function.
• The meter has max. measuring function.
• The meter has min. measuring function.
• The meter has clamp head frequency measurement function.
• The meter has auto power-off function.
• The meter has relative measuring function..
2.1 Part name
(1) Current clamp head: used for current measurement.
(2) Clamp head light
(3) Panel
(4) Trigger
(5) Function choice button (FUNC)
KPS-PA70 • Digital clamp meter
28
" appears on the