Minimum Clearances - Haier HLTD500AEW Manuel D'utilisation

DRYER DIMENSIONS
(108.0 cm)
ALCOVE OR CLOSET REQUIREMENTS

MINIMUM CLEARANCES

Dimensions shown are the recommended minimum clearance allowances.
Space on the sides of the dryer is required to avoid noise transfer.
Space at the rear of the dryer is necessary to accommodate exhaust ducting.
OTHER REQUIREMENTS
This dryer must be vented to the outdoors.
Do not install the dryer in a closet with a solid door.
A closet door must be louvered or vented with a minimum of 120 sq. in.
(774.2 sq. cm) of opening equally divided at the top and bottom of the door. The
air ow must not be obstructed in any way.
No other fuel-burning appliance shall be installed in the same closet as the gas
dryer.
8
42½"
30¼"
(77.7 cm)
1"
(2.5 cm)
2
60 in.
(387.1 cm 2 )
60 in. 2
(387.1 cm 2 )
27"
(68.6 cm)
1"
15"
(2.5 cm)
(38.1 cm)
5½"
(14 cm)