Sound Alert - Inanny N30 Guide De L'utilisateur

Sound alert

When sound alert is set on and the parent unit volume is turned off, the
parent unit will emit a sound alert when the noise level from the baby unit
exceeds a set limit.
• Press when the parent unit is not in use.
• Press or
• When ON? or OFF? Displays, press
Reset
The adjustable settings can be restored back to their original factory
settings.
• Press when the parent unit is not in use.
• Press or
• When CONFIRM? Displays, press
Temperature
The baby unit constantly monitors the temperature in your baby's
room and alerts you if it gets too hot (higher than 39ºC) with the display
showing "HIGH TEMP" or too cold (lower than 14ºC) with "LOW TEMP". The
temperature is displayed clearly on the parent unit's idle screen.
This is only for reference, and there may be a small difference
between the displayed reading compared with the actual
temperature. Therefore, please check the actual temperature in
the room against the display reading.
to scroll to SOUND ALERT, and then press
to scroll to RESET, and then press
to confirm.
.
to confirm.
10
.