Uas Installation - Diono Monterey XT 10800 Serie Manuel D'instructions

UAS Installation

To improve safety and performance, this booster seat is equipped with a unique, UAS
system that allows secure attachment to a vehicle's lower UAS anchor locations.
WARNING: Unsecured objects can become flying hazards and can cause
serious injury in an accident. Diono always recommends utilizing UAS
installation in vehicles equipped with lower anchors.
Disengage UAS connectors from storage slots and lay
booster seat on its side.
1
While depressing the cam lock lever,
2
Pull UAS connectors away from the booster seat and
extend both straps all the way.
3
Attach both UAS connectors to the vehicle anchors,
starting with the connector that is furthest from you.
For ease of use, make sure open end of hooks face
upward during use.
4
While pushing booster against vehicle seat,
adjuster strap tight and then the other.
NOTE: Even with UAS properly attached and adjusted,
child seat will still have movement against the vehicle
seat back and bottom.
5
pull one
12