Important Safety Instructions - GreenWorks CAM803 Guide D'utilisation

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE
INSTRUCTIONS
DANGER – TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
Read and understand all instructions before using this product. Failure to follow all instructions
listed below may result in electric shock, fire, or serious personal injury.
W A R N I N G
For indoor use only.
C A U T I O N
Risk of Electric Shock.
Use only in dry locations.
Store indoors, and do not expose to rain or water, avoid direct sunlight.
C A U T I O N
RISK OF FIRE OR ELECTRIC SHOCK, DO NOT CONNECT OUTPUT TERMINALS.
C A U T I O N
CHARGE ONLY RECHARGEABLE BAM704, BAM706 OR OTHER BAM SERIES BATTERY.
OTHER TYPES OF BATTERIES MAY BURST CAUSING PERSONAL INJURY AND DAMAGE.
• SAVE THESE INSTRUCTIONS - This manual contains important safety and operating
instructions for battery charger CAM803.
• Before using the battery charger, read all instructions and cautionary markings on the battery
charger, battery, and product using the battery.
• May result in the risk of fire and electric shock, store in a temperature and humidity-controlled
indoor area relatively free of conductive contaminants.
• Use of an attachment not recommended or sold by the battery charger manufacturer may result
in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
• Do not abuse the cord or charger. Never use the cord to carry the charger. Never pull the power
cord of the charger to unplug from an electrical outlet. Damage to the cord or charger could occur
and create an electric shock hazard. Bring to an authorized service center if cords are damaged.
• Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged
in any way. Take it to an authorized service center for an electrical check to determine if the
charger is in good working order.
• Do not cover the ventilation slots on the top of the charger. Do not set the charger on a soft
surface, i.e., blanket, or pillow. Keep the ventilation slots of the charger clear.
• Do not probe the charger with conductive materials.
4