Mounting The Radio In The Frame; Figure 12: Dashboard Mounting - Motorola WAVE Mobile TLK 150 Garantie Et Guide D'installation

2 Insert the mounting frame into the cut-out and retain it by bending back the relevant fixing tabs
(using all six where possible). Check the orientation of the frame is correct by ensuring that the
word "TOP" is uppermost.
NOTE:
The tabs are easily bent back by twisting a large flat-head screwdriver in the slot behind
the tabs.
For a more secure installation, the frame should also be secured with the appropriate
number of screws to the mounting conditions (min. 1).
The demounting tool can be used as an aid to mounting as well as demounting.
3.4.2

Mounting the Radio in the Frame

Procedure:
1 Provide the electrical connections for the radio (power, antenna, accessories).
2 Plug in all the connectors and push the radio firmly into the mounting frame until the two springs
snap into place.

Figure 12: Dashboard Mounting

Label
1
2
3
4
Chapter 3 : Installation Details for Standard Configurations
1
2
Description
Fixing Tabs
Demounting Tool
DIN Mount
Fix screws here to secure frame
MN006372A01-AF
4
3
19