Bottom Bracket Method - Westinghouse DELUXE QB025 Manuel De L'utilisateur

Installation (continued)
NOTE:
This product can be secured to the wall with or without the use of screws.
If you'd like to use wall screws to secure bottom bracket (BB) to the
wall, drill three 1/4" (6 .35 mm) holes in previously marked locations .
- Insert wall anchors (AA) into pre-drilled holes . Peel the backing
off the bottom bracket (BB) double sided tape and secure it to the
wall with screws and stainless steel washers (CC), see Fig . 14 .
If you are not using wall screws, skip this step .
AA
Wall Screws Optional
If you prefer NOT to use wall screws to secure the bottom bracket
(BB) to the wall, simply peel the backing off the bottom bracket
double sided tape (BB) and secure it to the wall by first aligning it
with previously drawn layout holes and pressing it firmly into the
wall for 5 to 10 seconds as shown in figure 14B.
BB CC
Fig .14
Press
Firmly
BB
Fig .14B
- Connect L-fitting (L) to brass connector assembly using restrictor
(K), see Fig . 15 .
K L
H
- Hang the bottom of the shower column (S) on the bottom bracket
(BB) first, then hang the shower column (S) on the stainless steel
mounting bracket (H) through the holes in the shower column,
see Fig . 16 .
H
BB
9
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
S
Fig .15
2
S
1
Fig .16
CONGLOMKB .COM