Table of Contents
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Safety Information
READ AND SAVE THESE INSTRUCTIONS
1 . Inspect this product before proceeding . Unpack the contents of
the package and check the components for chips, scratches,
cracks, dents or scuff marks . If any damage is noticed, do
not install .
2 . Use this product only in the manner intended by the manufacturer .
If you have any questions, contact the manufacturer .
3 . Installation work and plumbing must be done by qualified
person(s) in accordance with all applicable codes and standards .
4 . Protect the entire surface during installation .
BEFORE YOU BEGIN
1 . This product can be installed on both flat and uneven surfaces of
up to 1-1/12" (38 mm), see Fig . 1 .
2 . This unit might not be suitable for installation with some
fiberglass or acrylic showers.
3 . This product will connect with your current shower valve . There
is no need to take out your current valve or change it .
QB025
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MANUEL DE L'UTILISATEUR . . . . . . . . . . . . . . . . . . . . 13
CAUTION: Always wear safety goggles and gloves during
installation to prevent personal injury .
Flat mounting surface
2
2
Uneven mounting surface
Fig . 1