Cherry BARRACUDA Mode D'emploi page 7

Congratulations!
When you select a quality product from Cherry, you've
always made the right choice.
The following features in particular set your
BARRACUDA apart:
• The feel of Notebook keys
• The freedom of no cables with a range of 2 m
• Precise and fast with optical sensor
• Soft-touch surface
The 10 Hotkeys of the keyboard and the 5 buttons of
the mouse are freely programmable with the KeyM@n
software. Try it and see!
For information on additional products, downloads,
and much more, please visit www.cherrycorp.com or
www.cherry.de
We hope you enjoy your new BARRACUDA.
Your Cherry GmbH
1 Tips
1.1 Surface under the mouse
A bright, structured surface under the mouse
increases the efficiency of the mouse and ensures
optimum detection of movement.
A reflective surface is not suitable for use under the
mouse.
1.2 Cleaning the devices
Caution!
Damage may be caused by harsh cleaning agents or
liquids in the devices
1 Do not use solvents such as gasoline or alcohol
and scouring agents or scouring sponges for
cleaning.
2 Prevent liquids from entering the devices.
3 Do not remove the keycaps of the keyboard.
1 Clean the mouse with a slightly damp cloth and
some mild cleaning agent (e.g. dishwashing liquid).
2 Dry off the mouse with a soft, lint-free cloth.
1.3 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI results
from small, continually repeated movements.
Typical symptoms are discomfort in the fingers or
neck. For further information see: www.cherry.de/
english/service/servicedownload_rsi.htm
1 Set up your workspace for maximum ergonomic
benefit.
2 Position the keyboard and mouse in such a way
that your upper arms and wrists are on either side
of your body and are stretched out.
3 Take several short breaks, with stretching exer-
cises if necessary.
4 Change the position of your body often.
1.4 Disposal
1.5
Dispose of the old unit and the batteries
via a collecting point for electronic scrap
or via your dealer.
2 Troubleshooting
1 Check whether the batteries are inserted correctly
and supply sufficient voltage.
2 Reset the devices: Press Connect button on
receiver, and then press Connect button on bottom
of mouse and keyboard.
3 Connect the receiver to another USB port on the
PC.
4 Place the receiver away from electrical devices and
avoid metallic surfaces.