IKRA IERM 1434 Manuel D'utilisation page 23

b) Not to connect a damaged cord to the supply
or touch a damaged cord before it is discon-
nected from the supply. A damaged cord can
lead to contact with live parts.
c) Not to touch the blades before the machine is
disconnected from the supply and the blades
have come to a complete stop.
d) To keep extension cords away from the
blades. The blades can cause damage to the
cords and lead to contact with live parts.
e) To disconnect the supply (i.e, pulling the plug
from the socket)
- when ever leaving the machine unattended,
- before cleaning a blockage,
- before checking, cleaning or working on the
machine,
- after striking a foreign object,
- whenever the machine starts vibrating ab-
normally.
f) To carefully read the instructions for the safe
operation of the machine;
g) Recommendations:
To connect the machine only to a supply cir-
cuit protected by a residual current device
(RCE) with a tripping current of not more than
30 mA.
h) If the supply cord is damaged, it must be re-
placed by a special cord or assembly availa-
ble from the manufacturer or its service agent.
i) This appliance is not intended for use by per-
sons (including children) with reduced phy-
sical, sensory or mental capabilities, or lack
experience and knowledge, unless they have
been given supervision or instruction concer-
ning use of the appliance by a person respon-
sible for their safety.
j) Children should be supervised to ensure that
they do not play with the appliance.
GB | Operating Instructions
3