Technical Specifications; Package Contents; Safety Instructions For Pneumatic Tools - Parkside PDST 10 A2 Instructions D'utilisation Et Consignes De Sécurité

Mounting accessories:
10 Mounting screws
11 Dowel
z Technical specifications
Rolling system
Length of working
hose
Maximum work
pressure
Compressed air
connection size
Weight
Hose material
z Package contents
1 air hose reel
1 set of operating instructions
1 mounting accessories
(4 × mounting screws , 4 x dowel)
z Safety instructions for
pneumatic tools
BEFORE USE, PLEASE
READ FIRST THE OPER-
ATING INSTRUCTIONS
CAREFULLY. THESE FORM
PART OF THE DEVICE AND
MUST BE AVAILABLE AT ALL
TIMES!
This device can be used by
„
children 16 years and old-
er and also by persons with
All manuals and user guides at all-guides.com
Introduction / Safety instructions for pneumatic tools
Automatic
10 m + 3 m
10 bar
¼"= 6.35 mm
1.85 kg
Polyurethane
reduced physical, sensory or
mental capacities or a lack of
experience and knowledge
if they are supervised or they
have been instructed with
regard to the safe use of the
device and they understand
the dangers it presents. Do
not allow children to play with
the product. Cleaning and
user maintenance must not be
performed by children without
supervision.
In connection with a compres-
„
sor, the hose drum provides a
power supply for pneumatic
tools. The hose drum serves
only to transport compressed
air. It is not suitable for trans-
porting liquids.
The hose drum is intended for
„
installation to a suitable wall
or ceiling based on its design;
use without mounting is not
permitted.
The hose drum has not been
„
developed for commercial,
industrial or crafts use. This
product is only intended for
private use. The hose drum
must only be used as intended.
Any further, deviating use is
forbidden!
Consideration of the safety
„
note sin the operating instruc-
tion and the assembly instruc-
GB/IE 19