Lipo Battery; Product; Connected Devices - VOLTCRAFT BS-2000HD Mode D'emploi

c) LiPo battery
• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause
an explosion or a fire! Unlike conventional batteries/rechargeable batteries (e.g. AA or AAA type), the
casing of the LiPo rechargeable battery does not consist of a thin sheet but rather a sensitive plastic
film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into
fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the recharge-
able battery technology being used, you do not need to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain
amount of heat is generated during charging.
d) Product
• This product and any connected peripherals are only suited for inspection in voltage-free systems.
Make sure all system components are voltage-free before inspection.
• Only hold the controller and connected peripherals when used in voltage-free liquids.
• Avoid heavy mechanical loads and/or vibrations.
• Only for use in fresh water with a neutral pH value. Do not expose to:
- Acidic, alkaline, or caustic solutions.
- Oil or petrol
- Salt water
e) Connected devices
• Also observe the safety and operating instructions of any other devices which are connected to the

product.

20