Husqvarna 27007994244 Manuel De Montage page 52

5 MOUNTING FOR ADDITIONAL FUEL TANK
16
–
Route the single black connector under the frame to the right.
–
Route the 3-pin connector under the frame in the direction of
the headlight mask.
–
Route the long extension downwards behind the frame.
500755-01
–
Route the 3-pin connector through the cable opening to the
headlight mask.
500756-01
–
Position fuel pump switch
bar and tighten with the screws on both sides.
500757-01
–
Remove the cable ties.
–
Route the connector from the fuel pump switch along the
existing cables through the cable opening to the headlight
mask.
–
Secure all cables with cable ties.
500758-01
–
Join both white connectors.
–
Route all cables without tension and secure with cable ties.
500759-01
bp
with the clamp on the handle-