Hendi 261309 Mode D'emploi page 7

Speed control
You can control the "browning" evenness of the toasted bread by adjusting the speed of the conveyor.
Light brown
Medium brown
Dark brown
Preparation before using for the first time
• Remove all protective packaging and wrapping.
• In case of incomplete delivery or damages, DO
NOT use the appliance. Please contact supplier
(See == > Warranty).
• Clean the appliance with luke-warm water and
a soft cloth.
Operation
• Connect the power plug to a suitable electrical
power outlet.
• Power ON the appliance by turning the Heating
control knob to the desired setting (Full power/
Half power/Upper heating only). The power indi-
cator will be light up in green.
• Place the sliced bread on the conveyor by using a
tong (not supplied) to avoid danger of heat burn.
Ensure the bread is evenly placed.
• Rotate the Speed control knob to adjust the
speed of the conveyor & thus the browning even-
ness of the toasted bread.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely before
cleaning and storage.
• Clean the appliance regularly and any food resi-
dues removed.
• CAUTION! Never use any abrasive or hard objects
for cleaning.
• Clean the appliance with luke-warm water and
a soft cloth.
Parts How to clean
All accessories - Soak in warm, soapy water for about 10 to 20 minutes.
such as trays, etc. - Rinse under running water thoroughly.
External surfaces - Wipe clean with a soft cloth and a little mild detergent.
Make sure no water or moisture enters inside the of the
appliance.
• Place the appliance on a clean, stable, dry, level &
heat-resistant surface only.
• Make sure there is enough space around the ap-
pliance for ventilation purposes.
• Position the appliance in such a way that the plug
is accessible in all times.
• When not in use, set the Heating control knob to
the "0" position.
• Unplug the appliance from the electrical power
outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
• Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
• No any parts can be cleaned in the dishwasher.
Remark
Dry all parts well at
last.
7
EN