How To Use - Proctor Silex 66331 Mode D'emploi

How to Use

1. Unplug from electrical outlet.
2. Place pitcher onto base. Hold base
and turn pitcher clockwise to lock.
The pitcher will stop when locked.
(Illustration A.)
3. Fit the two parts of pulp control
basket together. Place onto center
shaft of juicer, aligning handle of
pulp control basket with handle of
pitcher. (Illustration B.)
4. Snap small reamer onto pulp control
basket. If juicing large fruit (oranges,
grapefruit) fit the large reamer directly
on top of the small reamer.
NOTE: Always select size of reamer
based on size of fruit to be juiced.
5. Slide the pulp control dial to select
the desired amount of pulp.
(Illustration C.)
NOTE: If the reamer is used without
the pulp control basket, the juice will
contain pulp and seeds.
6. Plug cord into 120 volt AC outlet.
7. Push down on reamer with halved fruit
to start the juicing action. Lift the fruit
up off the reamer and the juicer stops.
This juicer is designed with an auto-reverse. It automatically
reverses direction, from time to time, to make juicing easier.
Slide Right For Less Pulp
5
Illustration A
Illustration B
Illustration C