General Operation; Switching The Device On And Off; Setting The Camera Lighting - VOLTCRAFT BS-20 Notice D'emploi

• Finally, push the battery compartment back into the handle and close the battery
compartment lid again.
Insert it into the guide and push it forward until it latches.
• This completes insertion or replacement of the batteries.

8. gENEraL oPEraTIoN

a) Switching the device on and off
• Turn the on/off switch (a4) in the direction of the battery compartment until you hear a click.
The endoscope is switched on and the green LED (a3) will light up.
• To switch the endoscope off again, turn the on/off switch (a4) towards the swan neck until
you hear the click again. The endoscope is switched off and the green LED (a3) will go out.
b) Setting the camera lighting
• Switch on the endoscope.
• Turn the controller (a4) towards the battery compartment to increase lighting and towards
the swan neck to reduce lighting.
37