Classification Key - Assa Abloy OneSystem 309N Consignes De Sécurité

Tab. 1 :
Classification key in
accordance
with DIN EN 1125
EN
22

Classification key

DIN EN 1125 panic door locks with horizontal push rod
The properties of locks are described by the ten-digit classification key according
to DIN EN 1125.
Tab. 1 explains the classification key.
Class Meaning
3 High usage frequency in situations when there is little incen-
tive to be careful, thus posing the possibility of accidents or
misuse.
7 200,000 test cycles
7 Door mass greater than 200 kg (300 kg)
B Suitable for use on fire and smoke protection doors on the
basis of testing in accordance with EN 1634-1
1 Suitable for critical security function
3 High corrosion resistance in accordance with EN 1670:2007
Section 5.6
2 See DIN EN 179, because this standard specifies stricter intru-
sion protection requirements
2 Approved for handle bar / push bar projecting up to 100 mm
(normal projection)
A/B Panic door lock with
· A · handle bar actuation
· B · push bar actuation
A/B For installation in
· A · double-leaf doors in the active leaf (lock with unlocking
· B · single-leaf doors (lock without unlocking pin)
pin) (certification procedure still pending)
Information