Assa Abloy OneSystem 309N Consignes De Sécurité page 17

Notices according to DIN EN 179 and DIN EN 1125
!
Warning!
It is hazardous to modify doors along escape routes: The safety features of this
product are an essential requirement for its conformity with DIN EN 179 and DIN
EN 1125. Do not make any changes which are not described in these instructions.
Unsuitable doors reduce personal safety and intrusion protection: Only ap-
proved and technically correct doors are suitable for installation of the OneSystem
Security Lock 309N / 319N. Prior to the installation of the OneSystem Security Lock
309N / 319N, the door must be checked to ensure that it is attached properly and
is not warped. The door must be approved for use of the OneSystem Security Lock
309N / 319N. Door operating elements may not impede each other.
The OneSystem Security Lock 309N / 319N is not approved for use on double acting
swing doors.
Unsuitable locks impair personal safety and fire protection: The OneSystem
Security Lock 309N / 319N is suitable for fire doors and smoke protection doors
("Classification key", page 22). Check whether the door certification matches
the lock. Make sure that the OneSystem Security Lock 309N / 319N is installed in the
appropriate size and with the correct accessories.
Unsuitable door seals impair personal safety: No function of the lock may be
impaired when door seals are used (such as profile seals or bottom seals).
Broken glass doors may lead to severe injuries: Glass doors or glass parts on
doors must be made of safety glass or composite safety glass.
Unsuitable fastening means reduce personal safety and intrusion protection:
Suitable means of fastening must be used depending in the installation situation
and materials of the door.
17
Information EN