Presentation Of The Different Symbols; Main Operations Of The Appliance - Krups EA9000 Serie Mode D'emploi

Masquer les pouces Voir aussi pour EA9000 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KRUPS
SERIE EA9000

2.2 Presentation of the different symbols

n
The table below summarises all the symbols used on the screen:
To confirm the step.
To return to the previous step.
To scroll through the different options.
To bring the steam nozzle up in some menus.
To bring the steam nozzle down in some menus.
To go to the next step or stop a preparation in progress.
For example, during a cycle of cappuccino, to move from phase the foaming phase to the coffee
phase during coffee recipe or interrupt the coffee phase at the end of recipe.
To stop the cycle during preparation.

2.3 Main operations of the appliance

n
Turning the appliance on or off
Press the "On/Off" button.
n
Filling the bean container
Put coffee beans into the container, which has a capacity of about 250 g.
n
Open the bean container lid.
Put in the coffee beans.
Close the bean container lid.
12
The machine prompts you to fill the bean container although there are beans in it: Some types of
n
coffee can interfere with optical sensors; you must shake the beans with your hand to make the function
operational once again.
The machine detects beans, but the coffee dispensed is very/too light: Some beans (especially those
n
that are too large or too greasy) do not easily go into the grinder. Use your hand to ease them into the
grinder and/or change the type of coffee beans.
The machine does not detect the absence of coffee beans: Check that a bean is not obstructing the
n
optical sensors. Otherwise, the function is not operational.
!
Caution:
Never put ground coffee or water into the coffee bean container.
Ensure that no foreign bodies (e.g. small stones, hard wood) can get into the coffee bean
container as they could damage the grinder (not covered by the guarantee).
Danger:
Any contact of the conductive parts of the appliance with humidity or water may lead to fatal
injuries due to the presence of electricity!
n
Filling the water tank
Open the right door.
Lift and pull the water
tank towards you.
The machine prompts you to fill the tank with water although there is water in it: Caution: The
n
machine includes a mechanism that manages the water level required for the requested recipe. It is
therefore normal that the water level is not always the same in the tank when there is a request to fill it.
The machine does not detect my tank: Please check whether the tank has been inserted fully (until
n
you feel resistance).
!
Caution:
Only put water in the tank!
ENGLISH
1
2
Fill the tank.
Replace the tank.
13

Publicité

Table des Matières
loading

Table des Matières