Important - Krups EA9000 Serie Mode D'emploi

Masquer les pouces Voir aussi pour EA9000 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KRUPS
SERIE EA9000
4.2 Preparing coffee-based drinks with coffee beans
n
This section explains how to operate the machine using its features, taking the example of espresso
and cappuccino.
n
Espresso
Press the "Espresso" button on the touch screen.
n
If the machine detects no beans when you request this recipe, it will ask
n
you to fill the bean container (see section 2.3).
If the machine detects no water when you request this recipe, it will ask
1
n
you to fill the tank.
Place the cup(s) under the coffee nozzles.
n
You can lower or raise the coffee nozzle to suit the size of your cup(s).
n
Possible settings
n
You can prepare one or two cups with your appliance.
n
Choosing the strength: The more beans you select, the stronger the
n
preparation will be. You can modify the strength using the arrows on the
left and right of the symbols (except in the case of double espressos).
2
Choosing the volume: The screen displays the last volume setting
n
associated with espresso. You can modify this volume using the arrows
on the left and right of the indicated value
Press the "Start" button on the touch screen to start the preparation.
n
Preparing an espresso
n
The machine starts preheating, if required, and then grinds the beans,
n
tamps the ground coffee and finally brews the coffee.
You can adjust the coffee volume during the cycle using the up and down
n
3
arrows.
You can stop the preparation by pressing the "Stop" symbol or the On/Off
n
button (1) or the ground coffee button (2).
Remove the cup when the screen shows: Your espresso is ready.
n
22
.
n
Cappuccino
!

Important:

To prepare your Krups milk-based recipes to perfection:
The recipes suggested were made with cold semi-skimmed UHT milk, straight from a refrigerator (7°C), and served
n
in the cups supplied with the machine.
You can also use (fresh) cold pasteurised or UHT skimmed, semi-skimmed or whole milk, straight from the
n
refrigerator. What is important is that it should be fresh and at this temperature. Using special milks (microfiltered,
raw, fermented, enriched, etc.) can produce less satisfactory results especially when it comes to the quantity and
quality of the froth and therefore are not recommended.
To guarantee the best results, we recommend that you follow the indicated proportions and use the cups supplied
n
with your machine
If you use a cup other than those supplied with the product, make sure you choose a cup suitable for the volume
n
in the recipe (taking frothing into account).
If your milk is at room temperature, reduce the pre-heating time (press >> during the recipe).
n
Press the "Cappuccino" button on the touch screen.
n
If the machine detects no beans when you request this recipe, it will
n
ask you to fill the bean container (see section 2.3).
1
If the machine detects no water when you request this recipe, it will
n
ask you to fill the tank.
Choosing the volume (small/medium/large).
n
The screen shows the last volume setting associated with cappuccino
n
(volume of milk + volume of coffee + volume of froth). You can modify
2
this selection using the arrows on the left and right of the indicated
value (small – medium - large).
Press the "Start" button.
n
Fill the cup with the volume of milk indicated.
n
Pour the quantity of milk indicated on the screen into the cup.
n
Press the OK button.
3
n
ENGLISH
23

Publicité

Table des Matières
loading

Table des Matières