Atag WO61 BM Serie Mode D'emploi Et Instructions D'installation page 71

reinstalling filter cassette
The filter has to be installed with the locking mechanism at
the front.
Open the locking mechanism. This pulls the projections at
the front of the filter inwards. When installing the filters hold
the locking mechanism in this position.
1 Push the projections at the back of the filter into the
openings provided for this purpose at the rear of the
extractor hood.
2 Hinge the filter upwards.
3 Release the locking mechanism. The projections at the
front of the filter move outwards into the openings
provided for this purpose at the front of the extractor
hood.
The filter is now correctly positioned.
maintenance
cleaning
GB 9