Switching On - Atag WO61 BM Serie Mode D'emploi Et Instructions D'installation

operation

switching on

introduction
switching on
on button
fan buttons
switch off
off button
switching lighting on
lighting button
switching lighting off
GB 6
Set the extraction capacity and lighting on the control panel.
Read on this page how to use the facilities.
Press the fan button for the desired setting (1, 2, 3).
1 is the lowest setting, 3 the highest.
The fan will be switched on at the desired setting.
Press the off button (
The fan is switched off.
Press the lighting button (
The lighting is switched on.
Press the light switch (
The lighting is switched off.
).
).
) again.