INTRODUCTION
Congratulations on your purchase of the Bullet by MARSHALLTOWN SharpShooter Pro. It is proudly Made in
the USA, manufactured with the highest-grade materials, and can be used for both flooring and siding. We have
designed it with the flooring and siding professional in mind.
Other features of your SharpShooter Pro include:
• Easy, quiet one-cut action
• Ability to cut inside without dust
• Built in ruler for accurate cuts
• Full table with high-density polymer wear surface
• Metal-jacketed polymer bearings
• Aircraft grade aluminum frame
• Dual rails
• Chromium vanadium blade
• Replaceable blade-stop
And can cut material 5/8" thick and 9" wide, including:
• LVT/LVP/WPC/MLF/SPC
• Engineered Hardwood Flooring (solid up to 5/8" and 1250 Janka)
• Laminate Flooring
• Fiber Cement Siding
• Narrow Vinyl Siding
This owner's manual provides the information needed to operate and maintain this SharpShooter Pro. Carefully
read and follow all safety and operating instructions in this manual. Ensure every operator of this flooring
shear reads this manual before operating the unit. The replacement of any part on this flooring shear with a
component other than a manufacturer authorized replacement part may adversely affect the performance,
durability, or safety of the product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this
operator's manual. The manufacturer reserves the right to make changes on or add improvements to its
product at any time without prior notice or obligation. The manufacturer reserves the right to decide, upon its
sole discretion and at any time, to discontinue this product or replacement parts thereof.
This manual covers the SharpShooter Pro. For technical questions or repair parts, please call MARSHALLTOWN
customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
2 of 14
WS2550
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com