Safety Instructions; Machine Information - Ferm GRM1026 Traduction De La Notice Originale

HIGH PRESSURE CLEANER
The numbers in the text refer to the diagrams
on page 2 and 3.
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before using
this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
Introduction
The high pressure cleaner GRM1026 is quick and
efficient for cleaning vehicles, machines, boats,
buildings, etc., by the removal of persistent dirt
using clean water and chemical detergents.
When using chemical detergents, only use
biodegradable types. Only clean vehicle engines
in areas in which suitable oil traps are installed.
Contents

1. Machine information

2. Safety instructions

3. Assembly
4. Use
5. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Voltage
Input power
Max. pressure water supply
Max. working pressure
Max. water temperature
Max. working flow rate
Weight
IP class
LWA(acoustic power)
Vibration value
Product information
Fig. 1
1. Hose holder
2. On/off switch
3. Water inlet
4. Wheel
5. Spray gun holder
6. Handle
7. Cable holder
4
8. Spray gun
9. Spray Lance
10. Detergent tank
11. High pressure outlet
12. Inlet filter
13. High pressure hose
14. Detergent adjustment
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Safety instructions
When using electric machines always observe the
220-240V~ 50/60 Hz
safety regulations applicable in your country to
2200 W
reduce the risk of fire, electric shock and personal
12 bar
injury. Read the following safety instructions and
170 bar
also the enclosed safety instructions.
50º C
7.5 l/min
Electrical safety
10.7 kg
IPX5
89 dB(A)
<2.5m/s 2
Replacing old cables or plugs
• Throw away old cables or plugs immediately
as soon as new ones have replaced these. It is
dangerous to put the plug of a loose cable into
the socket outlet.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
DO NOT direct the water jet
towards people or animals.DO
NOT direct the water jet towards
the unit itself, electrical parts or
towards other electrical
The machine is not intended to be
connected to the potable water mains.
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate label.
Class II machine - Double insulation -
You don't need any earthed plug.