– The safety devices are blocking the
starter.
Remedy:
– Install the cover. (
6.1)
– Check the safety devices (see
instruction manual of the ride-on
mower).
Fault:
The coupling triangle cannot be swivelled
after the swivel arm release has been
actuated.
Possible cause:
– Cable adjusted incorrectly.
– Cable damaged.
Remedy:
– Adjust the swivel arm release cable.
(
13.1)
– Replace cable.
Fault:
Snow plough rattles (vibrates) excessively
during snowploughing.
Possible cause:
– Snow plough is incorrectly adjusted.
Remedy:
– Adjust the snow plough. (
Fault:
Poor clearing performance.
Possible cause:
– Amount of snow is too great.
Remedy:
– Reduce clearing width or mount snow
chains (not included in standard
equipment).
36
Fault:
Poor or no traction on rear wheels.
Possible cause:
– Amount of snow is too great.
Remedy:
– Reduce clearing width or mount snow
chains (not included in standard
equipment).
12.)
0478 907 9918 B - EN