Names Of Parts And Their Functions; Main Unit Front Panel - TAD D1000TX Mode D'emploi

NAMES OF PARTS AND THEIR FUNCTIONS

Main unit front panel

1 2
1  Power button
Use to set power to ON/standby mode.
2 Power indicator
Lights to indicate the unit's power status.
Lighted yellow: ON (unit can be operated).
Off: Standby (indicates power cord is connected and unit
is in standby mode).
3 Operating buttons
Use to operate the player.
DAC MODE
Press to switch to digital/analog converter input. This
operation can be performed when disc play is stopped.
VOL (−/+) button
The line output sound volume of this device is adjusted.
Note
' To fix the maximum output at the max. value for use, hold
the VOL (+) button pressed with the output maintained at
78 (max. value).
h
Press to open and close the disc tray.
g
Press to stop playback.
CAUTION
' When using the volume function and connecting directly to a power amplifier (without using a pre-amplifier), be sure
to make the connection only after setting the volume to "0" (zero). If the connection is made with the volume set to a
large value, an excessive sound volume is generated to damage the speaker or your hearing ability.
' All the displays are turned off by controlling the switches on the main unit or remote controller (if attached). But, the
power supply is not stopped. To completely block the device from the power supply, it is necessary to disconnect the
power plug (breaker) from the power outlet. Place this device near the power outlet by allowing the power plug (breaker)
to be easily accessible.
' When going on vacation, or otherwise leaving the unit unused for an extended period of time, the power plug should be
disconnected from its power outlet.
12
3 4 5
3
6 7

Press to play or pause disc. When pressed during
playback, enters pause mode.

Press to return to beginning of currently playing track.

Press to advance to beginning of next track.
4 SACD indicator
This indicator lights when an SACD disc has been
inserted, or when the SACD layer of an SACD/CD hybrid
disc has been selected.
5 Display
The display provides graphic information about the unit's
many operations and functions.
6 Disc tray
Load discs here.
7 Remote control sensor
Point remote control unit at this sensor to operate.
Effective distance is within about 7 meters (23 ft.).
Note
' Repeat mode is canceled if the disc play is stopped.
3