Coby CWBR-110 Manuel D'instructions page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

◦ Turn on the Bluetooth® device and search for CWBR-110.
Connect it to your device.
◦ Input "0000" if you are prompted to provide a password, then
press confirm.
Wirelessly Charging your Mobile Device
Note: Wireless Charging only works when plugged in.
• Place your phone with its back against the Charging Pad. Check to
see if your phone lights up/ indicates that it is charging properly.
• If the Wireless Power Indicator begins blinking, there is an issue with
the device's voltage, current, or temperature. To resolve the issue,
remove your device from the charger, restart the device, and repeat
the setup process.
• Plug your device's charging cable into the charging pad's USB port
and connect it to your mobile device's charging port.
• If the Wireless Power Indicator begins blinking, there is an issue with
the device's voltage, current, or temperature. To resolve the issue,
remove your device from the charger, restart the device, and repeat
the setup process.
Charging Your Device via USB
7

Publicité

Table des Matières
loading

Table des Matières