Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1600A01UV3.qxp_GKS18-25 4/27/20 8:12 AM Page 23
PROTECTIVE END CAPS
These caps help to protect the ends of the
tracks from damage, such as when
dropped on their ends (Fig. 19). The left 44
and right 45 caps are NOT interchangeable.
If one or both of the end caps become
damaged, they should simply be replaced.
CONNECTING MULTIPLE TRACKS
A.
Pull out the end caps 44 and 45 from
facing ends of the tracks 40 to be
connected. Store the end caps in a safe
place (Fig. 19).
B.
Insert the connector 41 into one of the
tracks 40 as shown and then slide
another track onto the other end of the
connector (Fig. 20).
C.
Make sure that the tracks have no gap in
between them. Move the connector 41
so that the center mark "⇐|⇒" is
positioned at the joint line. Turn all four
locks with a screw driver or a coin to
secure the connection (Fig. 21).
Track Assembly
Fig. 19
Fig. 20
Fig. 21
40
44
45
40
41
23
Publicité
Table des Matières
