Machine Breakdown/Transportation - Clarke American Sanders 3DS Manuel De L'utilisateur

Machine Breakdown/Transportation

To break down the machine, follow this procedure:
1. Unplug machine from wall and wrap cord.
WARNING: Injury to the operator or bystanders could
occur if the power supply remains con-
nected when servicing the equipment,
changing abrasive, or empting the dust
bag.
2. Unplug the power cord, motor cord, and vacuum from
electric box.
3. Disconnect the vacuum hose from the sanding unit.
4. Remove both hand knobs from the sanding unit and
separate sanding unit from truck frame.
(see Figure 2)
WARNING: The sanding unit is heavy (109 lbs.).
To avoid injury to the operator or dam-
age to the machine use a fi rm grip and
proper lifting technique. Get assistance
if necessary.
5. To lift the sanding unit grasp the assembly at the lifting
sites. (see Figure 3)
6. Unwrap the vacuum power cord from the cleats on
the handle and place on vacuum head.
7. Disconnect the vacuum straps by unhinging the draw
latch. The vacuum strap will spring back and the
vacuum can be lifted off the truck frame. (See Figure
4)
8. The handle may be taken off by removing the four
5/16-18 bolts and nuts that secure it to the truck
frame.
9. Secure all elements in cargo area when transporting
to avoid damage to the machine.
How to Move Machine (Room to Room)
When moving the machine short distances (room to room) it
may be moved by tilting it back until the 4" diameter wheels
contact the fl oor. With steady downward pressure on the
handle the machine can be pushed to the desired location.
(see Figure 5)
American Sanders Operator's Manual (EN) - 3DS
Clarke ®
ENGLISH
Figure 2

Figure 3
Figure 4
Figure 5
FORM NO. 74845B - 7 -
EN