Binzel Abicor BRS-FP Mode D'emploi page 26

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EU Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Warning and notice signs
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Commissioning
6.1 Connecting the pneumatic system
6.2 Establishing the electrical connection
6.3 Setting the release agent manually
EN - 2
EN-3 6.4 Flow chart
EN-3 6.5 Installing or replacing equipment parts
6.5.1 Setting up the pneumatic motor
EN-5 6.5.2 Set of clamping jaws
EN-5 6.5.3 Mounting the reamer
EN-5 6.5.4 Robot programming to approach the
EN-6 clamping position
EN-6
EN-6 7 Operation
EN-7
8 Decommissioning
EN-7
EN-7 9 Maintenance and cleaning
EN-8 9.1 Maintenance intervals
EN-9
EN-9 10 Troubleshooting
10.1 BRS-FP/BRS-FPi cleaning unit
EN-9
EN-10 11 Disassembly
EN-10
12 Disposal
EN-10 12.1 Materials
12.2 Consumables
EN-11 12.3 Packaging
EN-12
13 Appendix
EN-13
EN-16 13.1 Optional assemblies/accessories
BRS-FP/BRS-FPi
EN-17
EN-18
EN-18
EN-19
EN-19
EN-20
EN-21
EN-21
EN-21
EN-22
EN-22
EN-22
EN-23
EN-23
EN-23
EN-23
EN-23
EN-24
EN-24
BAL.0028 • 2017-03-10