KT 31-5009 Manuel De L'utilisateur page 3

W
ARNiNgS
SAVE THIS MANUAL
KEEP SAFETY WARNINGS & PRECAUTIONS, SETUP, OPERATION, TROUBLESHOOTING, AND WARRANTY. READ THE
ENTIRE USER'S MANUAL INCLUDING ALL TEXT UNDER SUBHEADINGS BEFORE SETUP OR USE OF THIS PRODUCT.
WELDING RAYS CAN BURN
FUMES AND GASES CAN BE DANGEROUS
WELDING SPARK CAN CAUSE FIRE OR EXPLOSION
CYLINDER MAY EXPLODE IF DAMAGED
! WARNING: READ ALL SAFETY WARNINGS AND INSTRUCTIONS
Always keep work area clean and well lit. Cluttered benches and work areas invite accidents. Keep bystanders, children, and visitors away while operating.
Distractions can cause you to lose control. Always keep combustible materials away from work area. If not possible cover combustibles with fire resistant material.
Torch may be hot after use. Do not place on any material other than bare concrete until cooled. Do not let sparks or hot slag come in contact with combustible
materials. Do not remove warnings, nameplates, or labels. Do not use under the influence of drugs, alcohol, or medication. Always wear eye and body protection.
Welding rays and infrared raditation may injure eyes and burn skin. Always wear shade 5 or higher welding goggles and protection. Do not allow others to
view without proper eye and body protection. Always wear dry, insulated, fire and heat resistant gloves. Always use apron, cap, sleeves, and bibs designed and
approved for welding procedures. Leather leg protection with fire resistant shoes or boots should be worn. Do not wear pants with cuffs, shirts with open pockets,
or any clothing that can catch and hold molten metal or sparks. Wear flame resistant ear plugs or muffs to keep sparks out of ears. Always wear NIOSH approved
respirator. Keep flamable and explosive materials at least 10 meters from arc to prevent spark or slag from starting a fire. Always keep ABC fire extinguisher
within reach and know how to use. Always use striker designed for oxy-acetylene welding. Do not use butane or matches. Always use flashback arrestors on the
base of torch. Use with oxygen and acetylene only. Do not modify for use with other fuel gases. Do not leave unattended. Do not overreach and keep proper
balance at all times. This product is not a toy, keep out of reach of children. Store securely and out of reach of children, persons unfamiliar with product, and
untrained users. Avoid fumes and gases. Always keep your head out of the fumes. Do not breath the fumes, use ventilation or exhaust to keep fumes and gases
away from your breathing zone. Exposure to fumes can increase risk of: cancer, Parkinson's Disease, heart disease, ulcers, damage to reproductive organs,
inflammation of intestines or stomach, kidney damage, and/or respiratory diseases. Service by qualified technician only.
Use accessories in accordance with these instructions and in manner intended for the product, taking into account the working conditions and the work to be
performed. Use of product for operations different from those intended could result in a hazardous situation.
! Warning: This product may expose you to chemicals such as lead, which is known to the State of California to cause cancer, birth defects, or other reproductive
harm. For information go to www.P65Warnings.ca.gov.
DO NOT DROP, STRIKE, PUNCTURE, HEAT, OR SET FIRE TO A CYLINDER. Do not use dented or damaged cylinders. Always secure cylinders to cart, wall, or post to
prevent them from falling. Use and store in upright position only. Always use cylinder caps when moving or storing. Do not store cylinders in temperature 120°F
(48°C) or higher. Keep acetylene tank wrench on valve whenever cylinder is in use for quick shutoff in case of emergency. Contact local solid waste authorities for
correct disposal or recycling of empty cylinders. Refer to page 7 for proper leak testing techniques.
The manufacturer's sole obligation under this warranty is limited to making replacement or repairs within 1 year of purchase. This warranty does not cover product malfunctions or damages
resulting from product tampering, misuse or abuse. Please follow the operating instructions carefully to maintain this warranty. Failure to do so will void the warranty. The manufacturer shall
also not be held liable for any indirect or consequential damages arising out of the use of this product. We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product. Please carefully maintain this warranty. This warranty is nontransferable and extends only to the original
buyer purchasing the products directly from authorized dealers. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. A copy of the
original receipt is required as proof of purchase. To replace product under warranty, please return to place of purchase for an across-the-counter exchange.
CYLINDER SAFETY
PRODUCT WARRANTY
www.ktindustries.net
3
PAGE | PAGE | PÁGINA
®
®