For Your Safety; Safety Instructions - Würth MLLR18 Traduction Des Instructions De Service D'origine

GB
Please read and comply with this
instruction manual prior to first use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
Note
Modification of the device or manu-
facturing of additional devices is not
permitted. Such modifications can re-
sult in personal injury or malfunctions.
Repairs to the device may only be
■
carried out by appointed and trained
personnel. For such purposes, always use
original spare parts from Adolf Würth GmbH
& Co. KG. This will ensure the continuing safe
operation of the device.
Caution - when operating devices or
■
adjusting devices or procedures are
used that do not conform to the ones
stated below, you may be exposed
dangerous radiation.
Laser radiation
Laserstrahlung
CLASS 2M LASER PRODUCT
Max Output ≤ 1 mW @ 630-670 nm
EN 60825-1:2007-03
Do not direct the laser beam on
■
people or animals. Never look
directly into the laser beam. This
measuring tool generates class 2M. laser
radiation. Looking directly into a laser beam
can damage your eyes, especially when using
concave optical instruments such as binoculars
etc.

For Your Safety

manual and the safety instructions could result in
damage to the device and danger for the operator
and others.
In case of transport damage, inform your dealer
immediately.

Safety instructions

Do not use laser glasses as protective
■
glasses. Laser glasses help to recog-
nize a laser beam. They do, however,
not protect you against laser beams.
Do not use laser glasses as sun
■
glasses or on public roads. Laser
glasses do not provide absolute UV
protection and impair colour percep-
tion.
Do not leave children unattended
■
with the laser measuring tool. They
could blind somebody unintentionally.
Do not use the measuring tool in
■
explosive atmospheres or near flam-
mable liquids, gases or dust. Mea-
suring tools produce sparks that can ignite
vapours or dust.
Use only genuine Würth accessories
■
and spare parts. When using non-rec-
ommended accessories, you may receive
incorrect measuring values.
WARNING - Prior to first use always
read the Safety instructions !
Failure to observe the instruction
11