Stile Lancaster CF13650 Guide D'installation page 11

INSTALLATION
 Thread the downrod into the motor housing until it bot-
toms out, then back it out until the hole in the downrod
aligns with the hole in the motor housing. Be careful not
to twist the electrical wiring when tightening.
 Install the clevis pin through the holes in the motor hous-
ing and the downrod, then reinsert hitch pin. Retighten
the lock screws to secure.
HITCH PIN
LOCK SCREW
MOTOR HOUSING
MOTOR
HOUSING HOLE
DOWNROD HOLE
DOWNROD
LOCK SCREW
CLEVIS PIN
11 - English
 Carefully feed the fan's electrical wiring through the motor
housing cap, then install the cap as shown.
MOTOR
HOUSING CAP
 Carefully feed the fan's electrical wiring through the
canopy screw cover ring and canopy, then install the
cover ring and canopy on the downrod as shown.
NOTE: Make sure the notched openings on the rim of the
canopy screw cover ring are facing up.
CANOPY
NOTCHED
OPENINGS
CANOPY SCREW
COVER RING