Assembly And Preoperation - Campbell Hausfeld CP5211 Instructions D'utilisation Et Manuel De Pièces

Operating Instructions and Parts Manual

Assembly and Preoperation

ASSEMBLY AND PREOPERATION
1. Slide the handle assembly over the lower legs of the cart
base. Use the (supplied) star knob and bolts to secure the
handle to the legs (See Figure 4).
2. Slide clear plastic detergent hose onto brass hose barb (See
Figure 5).
3. Insert quick connect spray nozzles into rubber holders on
front of the placard. (See Figure 6).
4. Secure garden hose (not included) to the inlet connection
on pump (See Figure 7).
5. Connect the high pressure hose to the pump outlet (See
Figure 8).
6. Attach the lance to the gun (See Figure 9).
7. Install quick connect nozzle (See Figure 10).
Figure 4 - Assemble handle
Figure 5 - Attach suction tube to barb fitting
Figure 6 - Insert spray nozzles into the holder
6
Hose Barb
Pump Outlet
Pump
Inlet
Garden
Hose
Figure 7 - Pump hook up
Figure 8 - Connect high pressure hose to pump
Figure 9 - Attach lance to gun
Figure 10 - Quick connect nozzle
www.campbellhausfeld.com
Detergent Hose/
Chemical Tube
Thermal
Relief
Valve