Electrical Connection; Grounding Instructions - Style selections 2290FM-18-251 Mode D'emploi

SAFETY INFORMATION (CONTINUED)

Electrical Connection

• A 15-Amp, 120-volt, 60 Hz circuit with a properly
grounded outlet is required. Preferably, the
fireplace will be on a dedicated circuit as other
appliances on the same circuit may cause the
circuit breaker to trip or the fuse to blow when the
heater is in operation. The unit comes standard
with 6-ft. three-wire cord, exiting from the rear of
the fireplace. DO NOT exceed the current rating of
the current tap.
A
Grounding Pin
SAVE THESE INSTRUCTIONS

Grounding Instructions

• This heater is for use on 120 volt. The cord has a
plug as shown below. See illustration or grounding
instruction. An adapter as shown at C is available
for connecting three-blade grounding type plugs
to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to
a permanent ground such as a properly grounded
outlet box. The adapter should not be used if a
three-slot grounded receptacle is available.
B
Metal
Screw
Cover of
Grounding
Box
5
C
Grounding Means
Adapter