Operating Instructions; Safety Instructions; Starting Up; Operation - SelfClimat DN 50 Instructions De Montage Et Mode D'emploi

III)

OPERATING INSTRUCTIONS

III.1

SAFETY INSTRUCTIONS

Any modification to the appliance may invalidate its certification. Consult the cerficates and the
documents relative to the fittings to the appliance in order to check on the temperature class and
explosion group. The person doing the work should be authorised for ATEX work to prevent the
deterioration of the mode of protection of the equipment certified.
III.2

STARTING UP

Installation and connection can only be done by qualified personnel.
The corresponding EN standards and national regulations covering the safety of appliances, as well
as general rules accepted in technical field, must be followed.
III.3

OPERATION

Introduction
The Self Climat overfill prevention device allows the tank it is fitted to, to be filled to a predetermined
level L1; at this level it provides automatic and complete closing.
At this stage, it allows reopening for draining the hose and the filler pipe if necessary without risk of
overflowing. (minimum drain volume : 150 litres).
Finally, it provides automatic and complete closing, without any possibility of reopening, at a
predetermined level Lmax.
The Self Climat overfill prevention device can equip gravity filled or pumped installations for
Category 2 hydrocarbons.
13